 |
|
BREEZE LOGGER
Click here to download as a PDF (611 kB)
Wind Data Logging Couldn't be Easier
• Companion logger for Etesian's Wireless Self-Powered Anemometer
• Data saved to USB Flash Drive - Years of data storage capacity on a 4 GB
drive. No card reader necessary
• Data saved as text (.csv file) - Opens directly into spreadsheet programs
• Preconfigured to log average, standard deviation, maximum, and
minimum.
• Averaging interval can be set from minutes to hours
• Streams real-time data via serial port
• Download data via serial connection or from USB drive
• Compatible with conventional wired speed and direction sensors
SPECIFICATIONS
RECEIVER / READOUT
Dimensions: 4.7 x 3.5 x 2.4 inch
Housing material: polycarbonate, clear cover
Local Display: Backlight LCD display 0.22 inch character height
Operating Frequency: ISM band, 916.5 MHz
Power Requirements: 9 - 28 VDC, 20 mA, 100 mA maximum
Power Connector: 5.5 x 2.1 mm DC power coaxial connector
Antenna Connector: SMA female
Serial Port: 3 wire RS-232 D-sub 9 pin connector, DCE device
Digital Output: RS-232, 9600 or 4800 baud
Data records: Plain text or NMEA sentences
Data
Saved to USB flash drive daily at midnight
Text CSV day files - files compatible with most spreadsheet programs.
Logging interval from 1 minute to 24 hours.
Mean, Standard Deviation, Maximum and Minimum logged for each interval
Data downloadable by serial port locally, remotely via modem, or network server
or simple flash drive removal
OPTIONS
Wired Analog Inputs:
Analog input: Ground referenced input 0 to 3 VDC
Pulse/AC input: logic level or AC generator pulse counting channel 0 to 1 kHz
Analog Outputs:
Pulse Wind speed output: TTL level pulse output 1 Hz per MPH or 1 Hz per m/s
Voltage wind speed output: 0 to 3 volts, proportional, 0 to 100 mph or 0 to 50 m/s
Wind Trigger Relay
Normally open relay contacts rated 24 VDC 0.5 amp.
High and low set points programmable. Averaging interval programmable
I/O Connector
Barrier terminal block, 0.375 pitch, accommodates 12 to 24 AWG wire |
|
