Etesian Technologies designs and manufactures self-powered wireless anemometers for wind turbines, fountains and cranes.
Frequently Asked Questions about Etesian Technologies self-powered wireless anemometer systems for wind turbines, fountains and cranes.
Etesian Technologies designs and manufactures self-powered wireless anemometer systems for wind turbines, fountains and cranes.Etesian Technologies sells a wide range of products connected with their self-powered wireless anemometer systems for wind turbines, fountains and cranes.Etesian Technologies sells a wide range of equipment configurations of their self-powered wireless anemometer systems for wind turbines, fountains and cranes.Etesian Technologies is a designer and manufacturer of a wide range of equipment configurations for their self-powered wireless anemometer systems for wind turbines, fountains and cranes.Contact Etesian Technologies, who sell a wide range of equipment configurations of their self-powered wireless anemometer systems for wind turbines, fountains and cranes.User manuals and other downloads for Etesian Technologies self-powered wireless anemometer systems for wind turbines, fountains and cranes.
Durable Etesian Technologies self-powered wireless anemometer systems for wind turbines, fountains and cranes.
BREEZE INDICATOR
Click here to download as a PDF (520 kB)

Model 201 Wireless Base Station


• Companion readout for Etesian's Wireless Self-Powered Anemometer
• Streams real-time data via serial port
• Compatible with conventional wired speed and direction sensors

Model 201 Wireless Base Station Indicator for Breeze self-powered wireless anemometer systems that include data logging.



SPECIFICATIONS

RECEIVER / READOUT

Dimensions: 4.7 x 3.5 x 2.4 inch
Housing material: polycarbonate, clear cover
Local Display: Backlight LCD display 0.22 inch character height
Operating Frequency: ISM band, 916.5 MHz
Power Requirements: 9 - 28 VDC, 20 mA
Power Connector: 5.5 x 2.1 mm DC power coaxial connector
Antenna Connector: SMA female
Digital Output: RS-232, 9600 baud


OPTIONS

Wired Analog Inputs:
Analog input: Ground referenced input 0 to 3 VDC
Pulse/AC input: logic level or AC generator pulse counting channel 0 to 1 kHz

Analog Outputs:
Pulse Wind speed output: TTL level pulse output 1 Hz per MPH or 1 Hz per m/s
Voltage wind speed output: 0 to 3 volts, proportional, 0 to 100 mph or 0 to 50 m/s

Wind Trigger Relay
Normally open relay contacts rated 24 VDC 0.5 amp.
High and low set points programmable. Averaging interval programmable

I/O Connector
Barrier terminal block, 0.375 pitch, accommodates 12 to 24 AWG wire